The Maryland Energy Administration ("MEA") offers the
Residential Clean Energy Rebate Program ("R-CERP") to eligible
Maryland homeowners who have installed a qualified clean energy system at their
homes. Regulations for the Clean Energy
Rebate Program can be viewed here.
Using the link below, you can
begin a residential solar photovoltaic ("PV"), solar hot water, or
geothermal heating and cooling Rebate application using the Electronic
Application System for the R-CERP.THE RESIDENTIAL CLEAN ENERGY REBATE PROGRAM IS A FIRST-COME, FIRST-SERVE PROGRAM. THE AMOUNT OF REMAINING FUNDING FOR THIS PROGRAM IN FISCAL YEAR 2020 (JULY 1, 2019 - JUNE 30, 2020) CAN BE FOUND UNDER THE TAB BELOW ENTITLED "CHECK YOUR APPLICATION STATUS".
ONLINE E-APPLICATION PORTAL
Please note: The personal email
address of the Rebate Applicant (owner and resident of the property where the
clean energy system is installed) must be provided. A contractor's email
address cannot be provided in lieu of the Rebate Applicant's email address. The
Applicant will receive all correspondence regarding the application. If the
contractor is selected as the primary point of contact on the application, the
contractor's email address will typically be copied on electronic
correspondence from MEA, as deemed appropriate by MEA. Applicants without a
valid email address must complete the paper application available in the
section entitled "The Rebate Process" below.
Signature Sheet Requirement: After MEA receives an online
application, an email will be sent from email@example.com to
the Applicant containing a signature sheet that MUST immediately be printed
out, completed and signed by the Applicant, and mailed to MEA. The application
is not considered submitted until MEA receives the completed signature sheet.
MEA will not review an application until MEA receives the completed signature
sheet. If you do not receive a signature sheet, please check your inbox
and/or spam folder for an email from firstname.lastname@example.org containing your
Note to Contractors
assisting Rebate Applicants with the R-CERP application process: At the same
time you submit customer Rebate applications to MEA using the electronic
portal, please also send an e-mail to your customer instructing them
to look for an email from email@example.com which contains the
signature sheet that must be reviewed for accuracy, printed, completed (to
include signature, date, and social security number), and physically mailed
back to MEA in order to complete the application.
To apply for a Clean Energy Rebate, proceed to “The Rebate
Paper copies of the Residential
Clean Energy Rebate Application can be found under the section entitled
"The Rebate Process" below.
*It is recommended that you refer to the Rebate Process tab below before
beginning to complete the online application. Be sure all required documents
and information are available before starting the online application. Once the online
application process has begun, you cannot leave the screen without losing all
information that has been input. You cannot save your work prior to submission.
here to complete a three question customer experience survey.
MEA has calculated the Clean Energy Rebate incentives based on several factors including available funds, economies of scale, a desire for more equitable distribution of funds, the cost of clean energy technologies, capacity factors, potential annual production, and data analysis from past Clean Energy awards:
Residential Clean Energy Rebate Incentives
Installed Capacity Range
Solar Photovoltaics (PV)
Minimum 1 kW-DC
Solar Water Heating (SWH)
10-100.0 sq. ft.
New Geothermal Heating & Cooling (GHC) System
(New Well Field and HVAC Equipment)
Geothermal Heating & Cooling (GHC) Heat Pump Replacement (only)
Rebates are allocated on a first come/first served basis across technologies and are subject to change in amount and existence based on funding availability.
Please note that the Installed Capacity Range reflects eligible system sizes. Projects larger than the capacities listed in the chart above are ineligible.
Projects must be completed by installation contractors who maintain at least one staff member with a North American Board of Certified Energy Practitioners ('NABCEP') installation certification; or, for companies with at least 50 employees, at least one staff member with a NABCEP Installation Certification for every 25 non-administrative employees, unless an installation contractor has been registered to do business in Maryland for less than twelve (12) months prior to the submission of an application for a Rebate.
Only purchased solar photovoltaic systems are eligible to apply for the Residential CERP Program. MEA does not currently award residential clean energy Rebates to third-party owned solar PV systems.
A geothermal clean energy Rebate is only available for NEW geothermal ground source heat pumps and wells on properties that have not received a previous geothermal clean energy Rebate. In addition, geothermal ground source heat pump clean energy awards may only be awarded for replacement of the ground source heat pump on a system that has NOT received a previous clean energy Rebate award. Applicants must provide documentation that the new heat pump has a higher efficiency than the heat pump being replaced.
Note for Geothermal Applicants: All paid-in-full
well drilling and installation invoices must be included if this cost is not
reflected on the invoice from your installing contractor.
B. Proof of passed inspection for all
permits required by the local authority having jurisdiction. This
documentation may be in the form of:
Photos/scans/copies of inspection stickers showing approval for
Photos/scans/copies of inspection certificates showing approval
for final inspections
Screenshots of online permit inquiry systems showing approval
for final inspections
If there is an exception for the need of a certain permit(s),
you must include an official letter from the local authority having
jurisdiction indicating that the requirement was waived.
C. Photographs of the installed clean energy
system. If the system is a roof-mounted solar PV or solar hot water
system, the photographs must clearly demonstrate where the system has been
installed, with all panels or collectors clearly visible.
D. Proof of housing ownership, age and primary
residence using the Maryland State
Department of Assessment and Taxation Personal Property data search
E. Proof of geothermal heat pump efficiency
improvement (Geothermal heat pump Replacements only)
out the application form (see above).
If applying through the U.S. Mail, download and print the
application form. Submit it with the applicable supporting documents (tip: If
you have any trouble opening the Adobe forms above, download the file, save it
to a specific location [e.g., desktop], then open the file from there.
If applying on line, scan your supporting documents, then
proceed to the electronic portal, below
ONLINE E-APPLICATION PORTAL
MEA is required to assess the impact of Clean Energy Rebates on historic
resources, applicants must
“pre-screen” their projects to reduce the odds of applications being
rejected on historic preservation grounds. Prominent installations of clean
energy systems on historic properties or properties within historic areas
will not qualify for this Rebate program.
Visit the Department
of Assessments & Taxation website and complete
Real Property Search to determine the age, ownership,
of purpose of the property.
Environmental Resources and Land Information Network,
or MERLIN Online, to see if a property is recorded in the Maryland
Inventory of Historic Properties. Print the results.
For pre-screening help, please follow the instructions
outlined on the following tutorial: Searching
for a Property's Historic Status on MERLIN Online and SDAT
you have any additional questions, you can contact MEA's historic
preservation specialist by email at: DLHistoric_MEA@maryland.gov.*
NABCEP (PV Projects only)
must be completed by installation contractors who maintain at least one
staff member with a North
American Board of Certified Energy Practitioners ('NABCEP') Installation
Certification; or, for companies with at least 50 employees, at least one
staff member with a NABCEP Installation Certification for every 25
non-administrative employees, except if an installation contractor has been
registered to do business in Maryland for less than twelve (12) months
prior to the submission of an application for a Rebate.
Status of Clean Energy Rebates
does not provide tax information or tax advice. Questions should be
directed to a qualified tax professional.
Renewable Energy Credits (SRECs)
suppliers must purchase and retire SRECs in order to meet their compliance
obligations under the law, or pay a Solar Alternative Compliance Payment
(SACP) for any shortfalls in SREC purchases.
help Maryland business owners realize the benefits of solar energy, the Maryland
Public Service Commission manages the Solar Renewable Energy Credits
(SRECs) program. Owners of solar PV and hot water systems can earn and
sell SRECs (equivalent to 1 Megawatt hour) based on the amount of energy
their solar system produces on the open market.
order to begin producing SRECs for the Maryland RPS, a solar generator must
apply for certification as a qualifying generator from the Maryland Public
Service Commission (PSC). SRECs must come from qualifying solar facilities
connected to the distribution grid serving Maryland.
Heating & Cooling Systems in the RPS
HB 1186,* Maryland became the first state in the country to make
the energy generated by geothermal heating and cooling (GHC) technologies
eligible for the RPS as a Tier 1 renewable source. To qualify, the GHC
technologies must meet ENERGY STAR standards and displace electric or
non-natural gas heating and/or old and presumed inefficient air
conditioning. Homeowners are eligible to receive Renewable Energy Credits
(RECs) for GHC systems that are commissioned on or after January 1, 2013.
For more information or assistance, email firstname.lastname@example.org or call 410-537-4000.
1800 Washington Blvd., Suite 755, Baltimore, MD 21230
(410) 537-4000 | 1-800-72-ENERGY